XL1050 Stage Power Amplifier with Input Impedance of 20K OHMS/10K OHMS
Description
1, Dynamic Range: Stage power amplifiers aim to provide a wide dynamic range, which is the difference between the softest and loudest sounds the amplifier can reproduce without distortion. A high-quality amplifier with good dynamic range ensures accurate and faithful reproduction of audio, capturing both subtle nuances and powerful peaks in the music or performance.
2, Stability and Clipping Protection: Stage power amplifiers incorporate stability and clipping protection mechanisms. Clipping protection prevents the amplifier from distorting when the input signal exceeds its maximum capability. Stability mechanisms ensure that the amplifier remains stable and doesn't oscillate or exhibit unwanted behavior, even when driving challenging speaker loads.
Quick Detail
| Model | XL-1050 |
TA 1KHz THD≤1%
Stereo Power | 8 OHMS | 2×1050W |
| 4 OHMS | 2×1500W |
TA 1KHz THD≤1%
Bridge Mono Power | 8 OHMS | 3000W |
Frequency Response | 10Hz-50KHz-1.5dB |
Noise A-weighting | ＞100dB |
Damping Coefficient | ＞200 |
Maximum Input Level | 21dBV/9V |
Slew Rate | ≥35V/μS |
Channel Separation | ＞70dB |
Input Sensitivity | 0.77V/1V/1.4V |
Input Impedance(Equilibrium/Disequilibrium) | 20K OHMS/10K OHMS |
Output Type | Class A |
Power Dissipation (half-power,8 OHMS) | ＜1200W |
Power Source | 220V-240V/50Hz |
Cooling |
Two variable speed fans |
Protection |
DC / short circuit / over voltage over current protection / soft start / power amplifier tube overheat protection / distortion limiting |
Display |
Power light (green), Protection light (red), Overload light (yellow), Signal light (green) |
Input |
Balanced input |
Output |
Professioanl binding post outputs |
Panel Control |
Left and right channel volume control, power switch control |
Backplane Control | Stereo / Parallel / bridge mono switch, 0.77v/1v/1.4v sensitivity switch |
Dimension (mm) | 482×429.5×88(mm) |
Advantage Of Factory
Our company was established in 1998, specializing in the development, production, and sales of audio electronic products for over 20 years. Complete equipment, advanced production technology, multiple high-efficiency assembly lines, semi-automatic production, ensuring quality and quantity. With strong technology and advanced management experience, perfect after-sales service (for example: after-sales troubleshooting, maintenance consulting, spare parts replacement, etc.) based on the forefront of the audio industry, dedicated to new and old customers for a better tomorrow.
Product Tags:
|
|
XL1050 Stage Power Amplifier Class A With 20K OHMS/10K OHMS Input Impedance Images
|
